6 Years manufacturer Shower Head QH-027 Factory in Namibia

6 Years manufacturer
 Shower Head QH-027 Factory in Namibia

Short Description:

Product Detail


Product Tags

"Quality first, Honesty as base, Sincere service and mutual profit" is our idea, in order to develop continuously and pursue the excellence for 6 Years manufacturer Shower Head QH-027 Factory in Namibia, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

  • Previous:
  • Next:
  • Q: Are you trading company or manufacturer ?

    A: We are factory.

    Q: How long is your delivery time?

    A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

    Q: Do you provide samples ? is it free or extra ?

    A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

    Q: What is your terms of payment ?

    A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
    If you have another question, pls feel free to contact us as below:

  • WEBSITE: http://www.swimmingpoollearning.com/

    YouTube Video Index — A list of all of my videos: http://poolmandave.blogspot.com/2014/03/swimming-pool-tips-reviews-how-to-video.html

    I already had re-plumbed the pump inlet last week so this is how you do the pump discharge line that sits above the pump. You would plumb both the same way.
    Repairing A Pump Discharge Leak Updated & Revised Version: http://youtu.be/o5V6P0IQpM4

    How to Fix Leaking Swimming Pool PVC Pipes: http://youtu.be/07cvZyxJiEU
    For Part 1 of Pool Pump not Working see: http://youtu.be/_k-BLL98bFU
    For part 2 which covers manually priming your pump: http://youtu.be/oshWO3zq17o
    Clogged Impeller, pool pump not priming: http://youtu.be/tdhkddQKb6M
    Skimmer Weir stuck, pump not priming: http://youtu.be/iKWJIFcK4MA
    Pool Skimmer Weir replacement & Install: http://youtu.be/DTDWA-la33w
    Pool motor tips, motor burning out: http://youtu.be/IdpoNzrBV8M
    Pool Water Level, proper water level: http://youtu.be/6dXIY0YN7bE
    Replacing a Pool Pump Housing Gasket: http://youtu.be/r0ReyYVpVM8
    Filter Saver, skimmer inserts: http://youtu.be/p0l-pNoO_eM
    Variable Speed Pumps, Dual Speed Pumps, a quick overview: http://youtu.be/YgOq1X65Kvg

    This is not a very difficult job, but it does require accurate measurements for the pipes to fit together. The last pipe fitting you do will be the most difficult as that will be the one that will make a complete sealed plumbing. Please plan accordingly so you will be able to fit it on. In this video I was able to move the pump back about 1 inch and slide the last pipe on, then I pushed the pump back completing the plumbing seal. It takes some practice but you can do it. If you make a mistake, simply cut out the pipe or use a new pipe and new fittings. The pipe fittings are not very expensive. All the material for this job will cost you about $20 -$25. Just by extra fittings in case you make an error in your cutting or measuring.

    Parts list:
    2″ MALE ADAPTER THREADED FITTING (for top of pump)
    For a better heat rating you can use this pipe also:
    2″ x 12″ nipple cpvc pipe (grey) and rated to 140 degrees
    2″ PVC PIPE 5 FT
    Plasto-Joint Stick Thread Sealant 1.25oz 11775 for threaded fitting on top of pump
    You can also use plumbers tape

    Of course if your pool has 1 ½” pipes adjust the fitting size accordingly.

    Pool-Tite Glue Instructions:
    Shake can well. Use a primer to clean the pipe fittings (priming step is not needed for non-pressure pipes less than 4″ in diameter. Apply liberal coat of cement to pipe depth of the socket, leave no uncoated surface. Apply a thin coat inside if the fitting, avoid puddling, Apply a second coat to the pipe. Assemble parts Quickly. Cement must be fluid. If cement surface has dried recoat both parts. Push pipe firmly into fitting giving it a ¼ turning motion. Hold pipe and fitting together for 30 seconds to avoid it popping out. Glue can get old so if it is gel like don’t use it.

    You can use the Purple primer or the clear one to prep the pipes. The Purple primer has a very strong dye in it so if you drip it won’t come off, so the clear one is less messy.

    Sometimes the pump itself will have warped a bit from the heat. In that case the 2″ x 12″ nipple cpvc pipe will sometimes seal it better.

    Here is a look at the pipe online -


    You will just have to cut it down to size and then do the repair accordingly.

    Mrdgvb1 Social Media Links:
    WEBSITE: http://www.swimmingpoollearning.com/
    Google +: https://plus.google.com/b/107735343574734346096/
    Blogger: http://poolmandave.blogspot.com/
    Facebook: https://www.facebook.com/pages/Youtube-Mrdgvb1/381257741926763?ref=hl

    If you found this video helpful, please visit my website, any donation is greatly appreciated.
    WEBSITE: http://www.swimmingpoollearning.com/

    With about 3 items and 3 steps, you can replace that leaky, outdated shower head with a brand new one. See how easy it is to update your shower with a more modern shower head.

    Send your message to us:

    • * CAPTCHA: Please select the Cup

    Related Products

    • * CAPTCHA: Please select the Cup

    WhatsApp Online Chat !