Factory Cheap Hot Water Saver QL-135 Factory from Uruguay
Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for Factory Cheap Hot Water Saver QL-135 Factory from Uruguay, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
French Drains are used to collect Subsurface water. Apple Drains in Charlotte, NC installs French Drains, in the Yard, Crawl Space and also on the outside of walls down at the footer.
System works like this:
A bed of gravel is laid and the perforated pipe is set. Then the MORE gravel is added to cover the pipe about 4 to 6 inches about.
Water does not drop into the pipe.
Water must FLOOD the Gravel Trench from the bottom.
Water FLOWS through the voids in the gravel and then into the pipe that carries it away. So the more gravel the better.
Drainage Contractors – Charlotte NC
i-phone, (smart phones)
Watch the full episode: http://www.thisoldhouse.com/toh/tv/ask-toh/video/0,,21001613,00.html
Ask This Old House plumbing and heating expert Richard Trethewey helps a homeowner install a washer and dryer in his basement. (See below for a shopping list, tools, and steps.)
Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse
Shopping List for How to Install a Basement Laundry:
- Dryer vent
- Flexible metal dryer vent tubing
- Hose clamp
- 2-inch-by-1-inch PVC Y-fitting
- 2-inch PVC piping
- Rubber repair coupling
- Copper pipe T-fittings
- Stainless-steel hoses
- 1-inch PVC piping and fittings
- 1-inch PVC check valve
- 1-inch PVC ball valve
- Washing machine valve
- Laundry sink
- Laundry sink pump
Tools for How to Install a Basement Laundry:
- 2 1/2-inch hole saw
- Caulking gun
- Reciprocating saw
- Copper-pipe cutter
Steps for How to Install a Basement Laundry:
1. To install the dryer vent, use a small drill bit to drill through the side of the wall of the house. Pick a spot that’s near the base of the home and free from obstructions.
2. With the small hole as a guide, use a 2 1/2-inch hole saw to saw through the house siding and into the basement.
3. Place a bead of caulk around the dryer vent where it connects to the building. Then screw in the vent using a driver.
4. Connect the flexible metal dryer vent tubing to the dryer vent using zip screws and a driver.
5. Use an elbow fitting to connect the dryer vent tubing to the back of the dryer.
6. Connect the dryer vent tubing to the back of the dryer using a hose clamp.
7. Plug the dryer into a 240-volt receptacle.
8. Next, to connect the washtub and water pump, use a reciprocating saw to cut out a piece of old galvanized pipe.
9. Replace the pipe section with a PVC Y-fitting and connect it to the old galvanized pipe using a rubber coupling.
10. Ensure the water supply is off, then, using a copper-pipe cutter, cut the existing hot and cold water lines.
11. Replace copper pipe connections with copper pipe T-fittings.
12. Then connect new copper pipes to T-fittings that will lead to the washer.
13. Apply flux to each joint and solder the connections with a torch.
14. At the washing machine supply location, install a washing machine shutoff valve.
15. Attach stainless-steel hoses to the washtub and faucet supply line. Hand-tighten and then snug them up with a pair of pliers.
16. Connect 1-inch PVC pipes from the washtub to the PVC Y-connection and drain line. Ensure you install a check valve to prevent discharged water from returning to the pump and a ball valve to control the flow.
17. Move the washer into place and connect the stainless-steel supply hoses.
18. Be sure to throttle down the water pump until it continuously stays on while water is being fed. Otherwise it will short-cycle, shortening the life of the pump.
Follow This Old House and Ask This Old House: