Online Manufacturer for DC3.6V Urinary sensing pulse flushing valve Factory in Egypt

Online Manufacturer for
 DC3.6V Urinary sensing pulse flushing valve Factory in Egypt

Short Description:

Quick Details Standard or Nonstandard: Standard Structure: Pilot Pressure: Low Pressure Power: Solenoid Material: Brass Temperature of Media: Low Temperature Media: Water Place of Origin: Zhejiang, China (Mainland) Model Number: QL-EV1008P Brand Name: QILI Application: Commercial Kitchen Packaging & Delivery Delivery Detail: 15 days Solenoid valve spec Products name: DC4.5V Automatic control valve Mode: QL-EV1008B Rated Voltage (V): DC 3.6 Pulse Width (ms): 20  Power(w)...


Product Detail

FAQ

Product Tags

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Online Manufacturer for DC3.6V Urinary sensing pulse flushing valve Factory in Egypt, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!


Quick Details

  • Standard or Nonstandard: Standard
  • Structure: Pilot
  • Pressure: Low Pressure
  • Power: Solenoid
  • Material: Brass
  • Temperature of Media: Low Temperature
  • Media: Water
  • Place of Origin: Zhejiang, China (Mainland)
  • Model Number: QL-EV1008P
  • Brand Name: QILI
  • Application: Commercial Kitchen

Packaging & Delivery

Delivery Detail: 15 days

Solenoid valve spec

Products name: DC4.5V Automatic control valve
Mode: QL-EV1008B
Rated Voltage (V): DC 3.6
Pulse Width (ms): 20
 Power(w)  3W
Working Pressure (Mpa) 0.02-1
Form of work Positive pulse signal to open the valve,Negative pulse signal to close the valve.
Medium Temperature(°C):  1-80
Media:  Water
Resistance (Ω): 12±0.5(at 20℃)
Lifes Span (times): ≥ 300 000
Application: Water purification equipment and engineering water control system.
Material: Stainless Threads, POM and Brass Solenoid
Standard: CE & Rohs

Product  Features

1.small size, the appearance of polygon, the side of the outlet design breakthroughs

2.The spool set includes the precision connecting mechanism to make its stroke fixed

3.four permanent magnet booster coil, the upper and lower double plug designed to significantly enhance the electromagnetic efficiency, magnetic stability to play a dominant position to meet the customer at any point of installation.

 Product  Photo

DC3.6V Urinary sensing pulse flushing valve

Product size                                                                                   Unit:mm

unit mm

company

  • Previous:
  • Next:
  • Q: Are you trading company or manufacturer ?

    A: We are factory.

    Q: How long is your delivery time?

    A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

    Q: Do you provide samples ? is it free or extra ?

    A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

    Q: What is your terms of payment ?

    A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
    If you have another question, pls feel free to contact us as below:




  • ***VISIT OUR SPONSORS***
    http://www.traderadiators.com | http://www.grahamplumbersmerchant.co.uk | http://www.buteline.com/uk | http://www.adey.com | http://celebrate200.co.uk

    Episode 5 of the Wash Basin Install Videos. This one shows you how to install your hot and cold water pipes safely and easily. The pipes are 15mm copper tube. This also includes the installation of two compression fitting isolation valves. For more information visit http://www.plumberparts.co.uk

    diy

    Right, so under our sink, as I said earlier on, we’ve got our 2 hot and cold water pipes, our waste pipe, the waste coming out of the bottom of the sink and our 2 hot and cold flows to the taps. What we’re gonna do in this video is connect these 2 pipes here to these 2 pipes there.and we’re also going to put 2 isolation valves in because it’s best practice. If there’s ever a problem with the tap there’s 2 isolation valves for the home owner or anyone like that to switch it off and then call a plumber out if they’ve got any problems. Before we do anything to these we’ve got to go and isolate them. If you don’t know where to do that or if they’re in the loft or anything like that, go downstairs and turn the main isolator off. Then run all your hot and cold taps until they all stop running and only then, when they’ve stopped running, you know that all the pipes are empty. At that point you can cut into the pipe here and cut these off They’re going to make a little bit of a hissing noise because water is going to go down that’s trapped in this pipe down to the taps below that I’ve opened up. So let’s give them a little wee twist, a little wee twist, twist. Twisting.There we go. Keep twisting round. There you go. Keep on going. You’ll get the same thing. You’ll see it’s just cutting a small score in there right now. That’s sucking as well. Just let it suck before you take it fully off. So it’s stopped hissing. There you go. Now the next thing we do is we clean these 2 ends up with some emery cloth because soldered pipe loves to be clean. Give them a nice clean. Get them really so there’s no paint on there at all. It takes a little while but persevere as it really does pay off this does. Once they’re nice and clean coat each one in flux ready for soldering.
    So, we’ve got our 2 elbow fittings here. One on here like that and now what you want to do is solder 2 small stubs on Get your copper pipe cut a small stub of about an inch and a half maybe 2 inches, flux around the end and put it on there like that. Now we’re ready to do our first 2 solders. I’m experienced at doing this obviously so it’s easier for me. But if you’re not happy get yourself a heat mat wet it, make sure you’ve got a little tub of water nearby or something like that so if you do find any catches alight you’ve got something to quickly put it out. Also when you do any soldering always make sure you do it at least half an hour before you intend to leave the premises or leave your house, or something like that Just so you know for sure that there’s no smoldering or anything like that that could eventually turn into a fire. Another tip about soldering you don’t need to have a burning flame like that. Just a nice light flame for 15mm pipe is good enough. It’s easier to control as well and you’ll feel a lot more relaxed doing it yourself Reel off yourself a nice long bit of solder and just pop it under your fitting like so and just warm the fitting up nice and even. It will take time but it’s well worth doing like this. Soldering is all about being patient. There you go. So that’s the first one done. Move onto the second. Now just wait a few seconds Often I’ll get my flux brush again and just paint around here to clean the fitting up a bit. After that you give it a wipe with a damp cloth and that will really clean the fitting up. If you leave any flux on the fitting it does tend to go green and it will look horrible in about a month’s time. So, best to get all the flux off now while you can, while it’s a bit warm. Once those 2 stubs of pipe have dried nicely, get our 2 check valves and pop them on. Make a note of the arrow direction and which way the water flow’s going to be push on each valve, and tighten them up. If you want to know how to tighten up compression fittings visit one of our other videos as we’ve done one on that. As soon as you’ve installed them correctly it’s best just to turn them off now. so that the slot is across the line of the pipe like that. What I’m going to do now is just finish off all the soldering, get the pipe put back together and get the actual tap connected up. Now all being well you’ve tightened up both nuts, all your solder joints are fine. They’ve cooled down and you’ve cleaned them off. You can hopefully now turn the water back on and test them but don’t run too much into the tap basin yet as we haven’t got the waste on. That’s what we’re going to be doing in the next video.



    Experience the relaxing beach culture and up-tempo urban vibe of Hyatt The Pike Long Beach. Escape to a refreshing hotel in Long Beach, where you embrace warm Southern California hospitality and a vibrant coastal lifestyle. From contemporary accommodations to farm-to-table dining and our rooftop bar, our ultra-stylish hotel offers a contemporary oasis where you are inspired to relax, play, eat, sip, connect and get into the spirit of Long Beach. Staying at Hyatt The Pike Long Beach, you’re exactly where you want to be, near the rolling Pacific surf, the fresh California cuisine, and the laid-back attitude of blue sky and sunshine. Let Hyatt show you around.

    Rooms & Amenities
    138 well-appointed rooms and suites
    Modern luxury fills this 360 sq ft guestroom with two lush queen beds, crisp linens, Italian cotton matelasse coverlets, clean lined furnishings and custom lighting. Generous white marble bathroom with oversized shower and waterfall shower head.

    Amenities
    Lush queen-size beds, crisp linens, Italian-cotton matelasse coverlet
    McCartan-designed furniture and lighting fixtures
    Lighted make-up mirror and hair dryer
    In-room laptop safe
    Cordless telephone
    Complimentary wired and wireless internet
    MP3 docking station, alarm clock radio, and soothing sound machine
    Personal climate control
    Luggage rack
    Generous bathrooms with walk-in shower and waterfall showerhead
    Soothing bath amenities
    In-room refreshment bar featuring Dean & Deluca® snacks
    In-room Cuisinart® Two-To-Go coffeemaker
    Roomy work station with ergonomic chair
    Flat panel television
    Blackout drapes
    Iron and ironing board

    Dining & Entertainment
    Bay Street Kitchen
    Bay Street Bar
    Rooftop 360° With Private Cabanas

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    WhatsApp Online Chat !