Trending Products VA029 ABS Angle valve,red handle with body chrome plated Asia
Quick Details Type: Other Accessories Place of Origin: Zhejiang, China (Mainland) Brand Name: QILI Model Number: QL-VA029 Color: chrome plated ...
We stick to our enterprise spirit of "Quality, Efficiency, Innovation and Integrity". We aim to create more value for our customers with our rich resources, advanced machinery, experienced workers and excellent services for Trending Products VA029 ABS Angle valve,red handle with body chrome plated Asia, Welcome to build the well and long standing business relationships with our company to create a glorious future together .customers' satisfaction is our eternal pursuit
- Type: Other Accessories
- Place of Origin: Zhejiang, China (Mainland)
- Brand Name: QILI
- Model Number: QL-VA029
- Color: chrome plated
- Material: ABS Plastic
- Size: 1/2
Packaging & Delivery
|Packaging Details:||1 piece of 1 bag ;
360 PCS/ CTN;
Carton size: 53.5*36*29.5CM
|Delivery Detail:||within 30days after get the depoist|
QL-VA029 ABS Angle valve,red handle with body chrome plated
Material is ABS chrome plated,
Size is 1/2"*1/2",
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
This is a Video demonstration showing how to make a fibreglass mould.
How to change your bathroom faucet l DIY replace bathroom faucet l removed an old faucet. I bought a Sonterra Brand 4″ Centerset Lavatory Faucet and replace the old one.
**Replace a Bathroom Faucet Instruction***
Replacing a leaky or outdated faucet isn’t as difficult as you might think. You can tackle the project with a basin wrench and a few other common tools. It should usually take no more than about an hour. The same steps apply if you’re installing a new faucet onto a new sink.
*Remove the Old Faucet-Turn off the water supply. The valves are typically under the sink. If not, turn off the water at the main valve. Then turn on the faucet to relieve any water pressure left in the lines.
-Disconnect the supply lines from the faucet. Use a basin wrench if you can’t reach the connections with your hands.
-Disconnect the lift rod, and then remove the nuts from under the faucet.
*Remove the Drain-Unscrew the slip nut on the P-trap. Put a bucket underneath to catch water in the trap.
-Disconnect the drain flange from the tailpiece. It should unscrew.
-Clean around the old drain and faucet holes. Mineral spirits can help remove old silicone sealant.
*Install the New Faucet-Follow the manufacturer’s directions for specific installation instructions. Most installations begin with installing the gasket on the bottom of the faucet. Some require sealant or plumber’s putty. Then put the faucet through the mounting holes in the sink and tighten the mounting nuts.
-Not all faucets come preassembled so you might have to attach the handles. It’s easy. Slip the guide ring onto the bottom of the handle, position it on the faucet base, and secure with the setscrew. A setscrew is the tiny screw on the underside of the handle. Your faucet probably came with a hex wrench to tighten it.
-Next move on to the drain. Screw the nut all the way down on the drain body and push the gasket over it. Some gaskets are threaded and simply screw into place.
-Apply just a little bit of silicone (some manufacturers recommend plumber’s putty) under the flange. Position the drain body on the bottom of the sink — making sure the pivot hole is facing the back — and screw the flange on from the top side.
-Underneath, tighten the nut and gasket. On the top, use mineral spirits to clean up any excess silicone.
-Install the drain rod next. Unscrew the pivot nut on the drain body, insert the horizontal rod through the hole in the stopper, and replace the nut. Push the horizontal rod down and secure the lift rod to the strap with the screw. Test the lift rod.
-Reconnect the supply lines to the faucet. If your sink is already in place, use a basin wrench to reach the faucet shanks.
-Flush the faucet by removing the aerator. This gets rid of debris or sediment in the faucet. Some faucets include a handy little tool to unscrew the aerator. When you’re done, keep it inside your vanity or with the rest of your tools. Turn on the hot and cold water for about a minute. Check all the connections for leaks and retighten if necessary. Screw the aerator back on and you’re done.